Steam Sauna manufactures steam generators for any steam bath need. They are the result of many years of continued research. Our large commercial units are manufactured to rigid quality standard. We also custom build for specialized applications e.g. yachts, Recreational Vehicles (RV’s), executive fitness rooms etc.

Your Steam Sauna Commercial generator has been factory tested for a minimum of 8 hours and is either C.S.A. approved and U.L. listed. This assures consistent quality and safety control. The ES series steam generators are custom built to your particular requirements, therefore your unit may not be equipped with all the features described in this manual. Especially 2Rooms units are slightly different from 1ROOM units. Contact your manufacturer for additional information or troubleshooting instructions.

SAFETY TIPS

(1) Read all instructions in this guide prior to installing your steam generator.

(2) Always ground the unit properly.

(3) Make sure there are no restrictions in the steam line(s) (existing lines).

(4) Never install valves or have other obstructions in the steam lines (e.g. kinks).
(new installation)

(5) Always turn off the electrical supply and the water before doing any work on the unit.

(6) Install the steam heads approximately 6"-12" from the floor. If possible, under the benches or in another location away from peoples feet and legs as they are extremely hot and could cause injury.

(7) Always ask qualified trade people to install or service your unit.