Commercial Steam Unit >> Specifications

 
MANUFACTURER STEAM SAUNA
Brand Name Steam Sauna
Model Executive Series
Operating Pressure Atmospheric
Dimensions 9” wide, 26” long & 24” high (working)
Clearance Minimum 36” above the floor on a shelf. Face access
panel forward with a minimum 8” clearance on both sides of the machine.
Shipping Weight Approximately 80 lbs.
Operational Weight Approximately 105 lbs.
Electrical 208V, 240V, 480V or 600V; single or 3 phase.

2-in-1 System

1st System - keeps room full of steam at all times
2nd System – controlled by a thermostat for temperature control.

Output Depending on room size (comes with a double integrated boiling system)
Electronic Control Module 6” x 6” x 4” electrical box to be hung on the wall. It contains P.C. board that is the control
for the pressured power flush, 2-in-1 system or stand-by mode, water level and drain, using a specific application factory preset microprocessor.
Thermostat 1 room temperature controller for each room
Timer On/Off switch, 24 hour or 7-day electronic timer, factory wired and machine mounted
Elements Low-density industrial incoloy heating elements
Boiler Tank 316 marine grade stainless steel with sloped bottom
Water Feed ¼” copper tube – field install a shutoff valve and 10 micron filter
Auto-Power Flush Valve 1 – ½” comes with compression connector for ½” pipe from city water supply
Motorized Drain Valve 1 – 1” comes with copper union
Steam Outlet 2 – ¾” comes with compression connector
Safety Valve Less than 10 P.S.I.
 
The most advanced Steam Generators and Saunas
© 2003 Steam-Sauna.com Hardwood Flooring