|
Control Packages
| 60-Min Mechanical Control |
|
|
Mechanical thermostat with 12 ft. capillary sensor
(10°C/50°F - 90°C/190°F)
60 minute timer (0 -60min.)
Indicator light
Stainless steel cover plate
|
| Top |
| Advance Blue Designer Control w/ Aroma Therapy Steam Head (s) |
 |
Chrome & silver trim in blue appearance
Chrome, brushed nickel, brass and gold trim in beige appearance
The control can be installed outside/inside sauna to control the time and temperature of the rooms. It stores 2 temperature setpoints and 4 time settings. Comes with a standard 15 ft connector cable and 20 ft sensor cable (extendable). To extend up to 50 ft, use RG3, RG5 cables or any 2 pairs cable (22 to 18 AWG). |
Functions
- Time control: 1 to 240 minutes. Preset for 4 time values; t1, t2, t3 and t4.
- For example, t1=30 min, t2=45 min, t3=60min, t4=90min.
- Temperature control: from 0° to 99°C (32° to 210°F). Preset for 2 temperatures, SP1 and SP2.
- Temperature display: Celsius or Fahrenheit. ON/OFF: Turns the unit ON or OFF at any desired time.
The values programmed by users are stored in memory in case of power outage. |
| Top |
| Power Junction Box |
|
|
Power Junction box is an electrical box which houses the electronic board that drives the controls and contactor.
The main power wire is terminated in this box, and from there runs to the sauna heater unit.
|
| Top |
| 24-HR/7-Day Digital Timer |
|
|
The 24-hour/7-day control programming capability allows a different schedule for each day of week. With 16 setpoints available, these time controls provide programming versatility.
Specifications:
- 16 Setpoints
- 24-Hour or 7-Day Programming
- Selectable Clock Format - 12 hour (AM/PM) or 24 hour format
|
| Top |
| A419 Series Electronic Temperature Control |
|
|
The A419 electronic temperature control features:
- Easy-to-Read Liquid Crystal Display
- Setpoint Range of -30 to 212ºF (-34 to 100ºC)
- Wide Adjustable Differential 1 to 30ºF or Cº
- Anti-Short Cycle Time Delay
- Interchangeable Temperature Sensors (up to 310 feed by Gauge 18 wire)
- Temperature Offset Function (triggered by an external timer)
- Easy programming through lockable three button keypad
- LED indicates output relay status
- Displays a message if sensor failed
|
| Top |
| ETC Two Stage Electronic Temperature Control |
|
|
ETC is a two stages electronic temperature control, featuring:
- Wide setpoint temperature range (-30ºF to 220ºF) and differential adjustment (1ºF to 30ºF)
- Simple keypad programming of setpoint temperature, differential
- Two individually programmable heating stages
- LCD readout of sensor temperature (C/F), control settings, relay status and onboard diagnostics
- Remote temperature sensing up to 400 feet
- Lockout switch to prevent tampering by unauthorized personnel
- Operating voltage of 120V/240VAC
|
|
Top |
|
|
|
