Commercial and residential Cedar log sauna rooms are custom designed to suit any requirement.
•Made from grade A+ kiln-dried clear red western Cedar. • Comes complete and ready to assemble – double-tongue and groove 2 x 4 construction. No studding vapor barrier or insulation required.• Dowel lock system for corner joints provides structural strength and a proper seal without using nails or glue.• Fast and easy to assemble.• Comes complete with walls, ceiling, door with glass window, benches, duckboard floor, heater guard, vapor-proof marine light, sauna heater with timer, thermostat, and rocks.
Energy efficient - Designed to heat the sauna room, not the heater itself.
Safety – 100% stainless steel construction, the body of the heater runs cooler than any other heater, very safe for sauna bathers.
Durability – Very low density incoloy silver soldered heating elements with little radiant heat are used. The lower the density, the longer the life of the heaters.
Comfort – User friendly programmable digital control, easy to operate
Serena Sauna Heaters
Harvia
Wall Mount
Floor Mount
Wall Mount
60-Min Mechanical Control
Mechanical thermostat with 12 ft. capillary sensor
Advance Blue Designer Control w/ Aroma Therapy Steam Head (s)
Chrome & silver trim in blue appearance
Chrome, brushed nickel, brass and gold trim in beige appearance
The control can be installed outside/inside sauna to control the time and temperature of the rooms. It stores 2 temperature setpoints and 4 time settings. Comes with a standard 15 ft connector cable and 20 ft sensor cable (extendable). To extend up to 50 ft, use RG3, RG5 cables or any 2 pairs cable (22 to 18 AWG).
Functions
Time control: 1 to 240 minutes. Preset for 4 time values; t1, t2, t3 and t4.
For example, t1=30 min, t2=45 min, t3=60min, t4=90min.
Temperature control: from 0° to 99°C (32° to 210°F). Preset for 2 temperatures, SP1 and SP2.
Temperature display: Celsius or Fahrenheit. ON/OFF: Turns the unit ON or OFF at any desired time.
The values programmed by users are stored in memory in case of power outage.
Power Junction box is an electrical box which houses the electronic board that drives the controls and contactor.
The main power wire is terminated in this box, and from there runs to the sauna heater unit.
The 24-hour/7-day control programming capability allows a different schedule for each day of week. With 16 setpoints available, these time controls provide programming versatility.
Specifications:
- 16 Setpoints
- 24-Hour or 7-Day Programming
- Selectable Clock Format - 12 hour (AM/PM) or 24 hour format
