“FOUR-IN-ONE” DIGITAL TIMER SET UP
Functions
The timer is capable of performing 8 different functions:
| Clock: |
Displays the current time. |
| Clock Set: |
Sets the clock. |
| Auto Start (option): |
Sets the Auto Start time, which turns on the unit at the desired time automatically. |
| Auto Stop (option): |
Sets the Auto Stop time, which turns off the unit at a time interval after Auto Start Time. |
| Time: |
Displays the time period that unit will be ON, which by default is set to 30 minutes. |
| Timer Set: |
Sets the Timer to run the unit for a longer or shorter period than 30 minutes but at the end of the period it sets back to the default (30 minutes).
|
| Temp.: |
Displays the current temperature in the steam room. |
| Temp. Set: |
Sets the target temperature in the steam room, which is 47°C/117°F by default. |
Buttons
There are four push & release type buttons on the timer which are used to set up different functions on the timer:
| Mode: |
The “Mode” button moves the lights to 8 different functions on the timer to select the desired function. |
| Set: |
The “Set” button saves the value that you have entered to each function. |
| Next: |
The “Next” button moves the flashing digit on display to the right, also used to turn on the unit. |
| Inc.: |
The “Inc.” button increments the value of the selected digit, also used to turn off the unit. |
Clock Set
The clock works on military time, i.e. 2:49 PM is “14:49”.
1. Touch “Mode” to select the “Clock Set”, “1200” will be flashing on display.
2. Touch the “Inc.” button until the appropriate hour is reached, i.e. 2 PM will read “1400”.
3. Touch the “Next” button and the next digit will be flashing.
4. Touch the “Inc.” button until the appropriate 10 minute interval is reached, i.e. 2:40 PM will read “1440”.
5. Touch the “Next” button and the last digit will be flashing.
6. Touch the “Inc.” button until the appropriate minute is reached, i.e. 2:49 pm will read “1449”.
7. Touch the “set” button to save this setting and the first two digits (hours) will be flashing.
Turn on and off
Touch the “ON” button. The Display will show “0030”. You can turn off the unit by touching the “OFF” button at any time; otherwise it will automatically shut down after the preset time (30 minutes by default).
Read the temperature in steam room
To check the current temperature reading, touch the “Mode” button to select “Temp.” function. You should read the current temperature in the steam room on the display.
Set the target temperature
The target for the steam room temperature by default is set to 47°C or 117°F. If you wish to change it, touch the “Mode” button until the “Temp. Set” function is selected, then follow Steps 2 to 7 above to set the desired temperature. Last digit will switch between °C and °F.
|
