Several options are available that may enhance the use of your Steam Bath®. All Steam Bath® steam units incorporate a microprocessor that utilizes state of the art technology. “Auto Flush” Series units have an added benefit of helping to keep the unit clean.

Auto Flush System
Drain system is an option that can be provided with either a manual shut off valve or an automatic solenoid valve.

After each use, the unit drains automatically. It drains out the water together with suspended minerals and other impurities. This helps to minimize the buildup inside the tank, greatly reducing servicing.

When you have finished your bath, the unit shuts down, and after 2 minutes, drains, then remains in a standby mode ready for the next use.

‘Four-in-One’ Digital Timer

This is the top of the line system for your home. Combine a “Four-in-One” Digital Timer with your unit and your steam bath will be ready when you want it. This module comes with a temperature sensor, which controls the temperature in steam room. The built-in thermostat will hold the room at your desired temperature.

When linked with our “Four-in-One” Digital Control Module, you can simply program, and forget it (see page 8 for more details).

In Room Electronic Touch Timer

This system gives you more control over the steam output. You can turn on and off the steam from inside the steam room at your wish. It is an electronic timer (30 minutes auto shut off) with ON/OFF switch and indicator light that allows you to control the steam density in your steam room.

Air Switch
As an added feature, you may wish to install an air switch. This will allow you to stop or start the steam output while inside the steam room. It is a convenient feature that allows you to control the steam density in your steam room. It operates similar to “In Room Touch Timer”, the only difference is that it’s pneumatic and doesn’t need power cable, but uses a small air tube.

Thermostat
To maintain your ideal temperature, a digital thermostat is available (not used with the “Four-in-One” Digital Timer). It can automatically control the temperature in the steam room and comes with a sensor. If you are going to be using your steam room for more than ˝ hour at a time, this will maintain your ideal temperature without overheating the room.

24 Hour Timer
For frequent users who may use the unit more than 30 minutes daily, a 24 hour timer can be installed on the unit when required. It automatically turns on the unit at desired time and shuts off the unit by the end of a day. Both ON and OFF times can be set by the user.